Android Things Developer Preview 4: сбой flash-all.sh на MacOSX

Я обновил BIOS из Linux, следуя этим инструкциям: https://software.intel.com/en-us/articles/installing-android-things-on-intel-edison-kit-for-arduino

а затем вернулся к своему MacOSX 10.12.5 и попытался запустить flash-all.sh

$ uname -a
Darwin ag.intel.com 16.6.0 Darwin Kernel Version 16.6.0: Fri Apr 14 16:21:16 PDT 2017; root:xnu-3789.60.24~6/RELEASE_X86_64 x86_64
$ ./flash-all.sh
target reported max download size of 117440512 bytes
sending 'gpt' (33 KB)...
OKAY [  0.008s]
writing 'gpt'...
OKAY [  0.149s]
sending 'u-boot' (375 KB)...
OKAY [  0.020s]
writing 'u-boot'...
OKAY [  0.104s]
erasing 'misc'...
OKAY [  0.132s]
rebooting into bootloader...
OKAY [  0.001s]
finished. total time: 0.415s
ERROR: could not clear input pipe; result e00002ed, ignoring...
ERROR: could not clear output pipe; result e00002d8, ignoring....
ERROR: usb_write failed with status e0004061
ERROR: usb_write failed with status e00002d9
ERROR: usb_write failed with status e00002d9
ERROR: usb_write failed with status e00002d9
ERROR: usb_write failed with status e00002c0
ERROR: usb_write failed with status e00002c0
target didn't report max-download-size
ERROR: usb_write failed with status e00002c0
ERROR: usb_write failed with status e00002c0
ERROR: usb_write failed with status e00002c0
ERROR: usb_write failed with status e00002c0
ERROR: usb_write failed with status e00002c0
ERROR: usb_write failed with status e00002c0
ERROR: usb_write failed with status e00002c0
ERROR: usb_write failed with status e00002c0
ERROR: usb_write failed with status e00002c0
FAILED (command write failed (Invalid argument))
ERROR: usb_write failed with status e00002c0
ERROR: usb_write failed with status e00002c0
ERROR: usb_write failed with status e00002c0
ERROR: usb_write failed with status e00002c0
error: Device does not support slots.

android-things intel-edison
person AG1    schedule 26.05.2017    source источник

Ответы (1)


arrow_upward
2
arrow_downward

Это регрессионная ошибка в сценарии flash-all для Edison, которая будет исправлена ​​в следующем предварительном выпуске. Вы можете временно решить проблему, внеся следующие изменения в flash-all.sh:

# Due to possible changes in the u-boot version, we might have some
# issues flashing gpt or recognizing the _a/_b partitions.
# Just to be safe, flash and reboot to the updated version
fastboot \
  flash gpt        "${OS}"/partition-table.img \
  flash u-boot     "${VENDOR}"/u-boot-edison.bin \
  erase misc \
  reboot bootloader \
  "$@"
sleep 5  <----- Add this line

Это позволит сценарию продолжить работу после первоначальной перезагрузки в процессе перепрошивки.

person devunwired    schedule 27.05.2017